ohci1394_0: Runaway loop while stopping context

I'm trying to use a buslink usb2/firewire external hard drive on a Toshiba
Satellite 5005-S507 running RH 9.0 with a 2.4.21 kernel. The firewire
controller is a TSB43AB22/A IEEE-1394a-2000 Controller.

The drive works fine via usb and firewire under Windows.

When the ohci1394 module is loaded I see the following my log:

Oct 1 13:45:14 jbodnar kernel: ohci1394: $Rev: 896 $ Ben Collins
<bcollins@debian.org>
Oct 1 13:45:14 jbodnar kernel: PCI: Enabling device 02:07.0 (0000 -> 0002)
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: Remapped memory spaces reg 0xe0878000
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: Soft reset finished
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: Iso contexts reg: 000000a8
implemented: ffffffff
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: 32 iso receive contexts available
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: Iso contexts reg: 00000098
implemented: ffffffff
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: 32 iso transmit contexts available
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: Set PHY Reg timeout
[0xffffffff/0x00004000/100]
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: GUID: ffffffff:ffffffff
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: Runaway loop while stopping
context: ...
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: Receive DMA ctx=0 initialized
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: Runaway loop while stopping
context: ...
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: Receive DMA ctx=0 initialized
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: Runaway loop while stopping
context: ...
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: Transmit DMA ctx=0 initialized
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: Runaway loop while stopping
context: ...
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: Transmit DMA ctx=1 initialized
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: OHCI-1394 165.165 (PCI): IRQ=[10]
 MMIO=[20000000-200007ff] Max Packet=[65536]
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: request csr_rom address: de165000
Oct 1 13:45:14 jbodnar kernel: ohci1394_0: Set PHY Reg timeout
[0xffffffff/0x00004000/100]

If I scan the scsi bus the drive is not found.

Any ideas?

--
Jason Bodnar
jason@shakabuku.org
http://www.shakabuku.org
"You want free speech? Let's see you acknowledge a man whose words make
your blood boil who is standing center stage advocating at the top of
his lungs that which you would spend a lifetime opposing at the top of
yours." -- President Andrew Shephard, "The American President"
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
mailing list Linux1394-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux1394-user