Re: aborting sbp2 command...

From: David Ranch <dranch_at_trinnet.net>
Date: Tue 07 Oct 2003 - 01:11:51 CEST
Message-Id: <4.3.2.7.0.20031006160849.033a7c70@trinity3.trinnet.net>

Hello Stefan,

>> So I should submit this device to the compatibility list?
>
>Some other users might find this helpful.

I've tried to email Dan Dennedy ( ddennedy -at- coolsite.net) multiple times to
reset my password so I can fix some of the compatibility info I've posted to no
avail. Any ideas how I can at least have the:

http://www.linux1394.org/view_device.php?id=492

item deleted so I can replace it with more info?

--David

Storage Manufacturer: CompuCable
Model: CompuCable 525DX
Bus type: IEEE 1394 Driver: SBP-2

Level of compatibility: Works Great

Special notes regarding compatibility:
   Used for system backups and it works great with this Ti chipset. Please note
that I have not had great success with this setup using the Lucent/Agere
FW323r4 chipset.

Other comments regarding the device's features:
   Metal enclosure; Supports > 137GB (48bit addressing); Oxford 911 IDE-FW
bridge chipset; Deep enough to accept IDE removable cages; offers both 1394 and
USB2.0 interfaces (only one interface active at a time); built-in fan (works
ok); offers external RCA audio connectors though no D-SPIDF; external power
brick (no internal power supply)
.----------------------------------------------------------------------------.
| David A. Ranch - Linux/Networking/PC hardware dranch@trinnet.net |
!---- ----!
`----- For more detailed info, see http://www.ecst.csuchico.edu/~dranch -----'

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
mailing list Linux1394-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux1394-user
Received on Tue Oct 7 01:52:15 2003

This archive was generated by hypermail 2.1.8 : Mon 02 May 2005 - 09:16:44 CEST