RE: Cannot Recognise External Drive (sbp2 problem?)

>From: Stefan Richter [mailto:stefanr@s5r6.in-berlin.de]
>
>You use 1394 drivers of Rev. 1010, which is the same revision as
>in the original kernel 2.4.22 from kernel.org.
>
>The sbp2 driver recognized the drive and logged in into it.
>
>Now you have to run rescan-scsi-bus.sh to make the scsi driver
>aware of the new "scsi" harddisk. (This step was not necessary in
>older kernels under certain circumstances, which is why it may
>have worked for you without that script in an older Knoppix
>version.)
>
>I really think it is just the missing rescan. (This is mentioned
>in the FAQ and the sbp2 documentation at www.linux1394.org BTW.)

Thanks for the help. I have looked at the FAQ/documentation a number of
times, but obviously not close enough the last time - sorry about that.

I downloaded a copy of the rescan-scsi-bus.sh, made it executable and then
ran it from a prompt. Still no go - here are the results:

knoppix@ttyp0[Desktop]$ rescan-scsi-bus.sh
Host adapter 0 (ide-scsi) found.
Host adapter 2 (sbp2_0) found.
Scanning hosts 0 2 channels 0 for
 SCSI target IDs 0 1 2 3 4 5 6 7 , LUNs 0
Scanning for device 0 0 0 0 ...
OLD: Host: scsi0 Channel: 00 Id: 00 Lun: 00
      Vendor: TOSHIBA Model: CD-ROM XM-1802B Rev: 1119
      Type: CD-ROM ANSI SCSI revision: 02
Scanning for device 0 0 1 0 ...
Scanning for device 0 0 2 0 ... 80: /proc/scsi/scsi: Permission denied
Scanning for device 0 0 3 0 ... 80: /proc/scsi/scsi: Permission denied
Scanning for device 0 0 4 0 ... 80: /proc/scsi/scsi: Permission denied
Scanning for device 0 0 5 0 ... 80: /proc/scsi/scsi: Permission denied
Scanning for device 0 0 6 0 ... 80: /proc/scsi/scsi: Permission denied
Scanning for device 0 0 7 0 ... 80: /proc/scsi/scsi: Permission denied
Scanning for device 2 0 0 0 ... 80: /proc/scsi/scsi: Permission denied
Scanning for device 2 0 1 0 ... 80: /proc/scsi/scsi: Permission denied
Scanning for device 2 0 2 0 ... 80: /proc/scsi/scsi: Permission denied
Scanning for device 2 0 3 0 ... 80: /proc/scsi/scsi: Permission denied
Scanning for device 2 0 4 0 ... 80: /proc/scsi/scsi: Permission denied
Scanning for device 2 0 5 0 ... 80: /proc/scsi/scsi: Permission denied
Scanning for device 2 0 6 0 ... 80: /proc/scsi/scsi: Permission denied
Scanning for device 2 0 7 0 ... 80: /proc/scsi/scsi: Permission denied
0 new device(s) found. proc/scsi/scsi: Permission denied
0 device(s) removed.

Can anyone suggest what I should try next?

Thanks for you help.

Christopher

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
_______________________________________________
mailing list Linux1394-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux1394-user
Received on Tue Oct 14 11:38:42 2003