Re: Audigy - Nothing detected

On Sun, 2003-11-02 at 09:20, Imothep wrote:
> I want to run an external Firewire-HD, but nothing is detected.
> I tried it with an iPod (no reaction) and with an external HD
> (with Oxford Chipset) also no reaction. :/
> The same HD has also an USB2 connection, which runs without a problem.
>
> It makes no difference if I switch the HD on or off (while plugged in).
> dmesg says nothing :/
>
> With gscanbus, I can only see one node (S400 Linux OHCI-1394).

Hi,
   We were just working on something similar this week with Andrew. His
system was, for whatever reason, not enabling the ports on his Realtek
1394 Phy, so nothing was seen.

   He provided a patch which is in the archives. If you have a similar
motherboard (Epox nForce) maybe you can try adding that patch and seeing
if it helps.

   You should try some simple stuff first, like all of your 1394 ports,
and maybe a different cable if you have one.

- Mark

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/
_______________________________________________
mailing list Linux1394-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux1394-user
Received on Sun Nov 2 19:09:17 2003