Re: sbp2 and fedora-core

From: Stefan Richter <stefanr_at_s5r6.in-berlin.de>
Date: Fri 20 Feb 2004 - 00:05:02 CET
Message-Id: <200402192302.i1JN2NUA008444@einhorn.in-berlin.de>

('BINARY' encoding is not supported, stored as-is)

On 19 Feb, informaciones wrote:
> Feb 19 09:54:07 servidor kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI):
> IRQ=[10] MMIO=[feadf800-feadffff] Max Packet=[2]

2 is really a bit too small for serious packets. :-)

>> On the other hand, do you know if this host works under kernel
>> 2.4?
>
> No, it did not

So it looks like the old problem which was discussed here or at
linux1394-devel some time before. Try the simple attached patch
over ohci1394.c. You should also test with 2048 instead of 1024
in the #define directive. Does it work?

-- 
Stefan Richter
-=====-=-=-- --=- =--==
http://arcgraph.de/sr/

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
mailing list Linux1394-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux1394-user

Received on Fri Feb 20 00:10:22 2004