Moin,
I'm new to firewire. Yesterday I installed a firewire card which lspci
shows as VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
(prog-if 10 [OHCI]).
I build a Kernel (2.6.6-rc1) with
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_PCILYNX=y
CONFIG_IEEE1394_OHCI1394=y
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_DV1394=y
CONFIG_IEEE1394_RAWIO=y
CONFIG_IEEE1394_CMP=y
At boottime I get the following output:
ohci1394: $Rev: 1172 $ Ben Collins <bcollins@debian.org>
PCI: Found IRQ 11 for device 0000:00:08.0
PCI: Sharing IRQ 11 with 0000:01:00.0
ohci1394: fw-host0: Unexpected PCI resource length of 0!
ohci1394: MMIO resource (0x0 - 0x800) unavailable
ohci1394: probe of 0000:00:08.0 failed with error -12
ieee1394: raw1394: /dev/raw1394 device initialized
sbp2: $Rev: 1170 $ Ben Collins <bcollins@debian.org>
ieee1394: Loaded CMP driver
There is an externel HD which I try to connect but after the above
message I didn't try to mount it. ;-)
Is there any chance to get this card working?
Matthias
-- Matthias Teege -- http://www.mteege.de make world not war ------------------------------------------------------- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click _______________________________________________ mailing list Linux1394-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux1394-userReceived on Fri May 14 10:27:39 2004
This archive was generated by hypermail 2.1.8 : Mon 02 May 2005 - 09:16:48 CEST