Re: "aborting sbp2 command" in 2.6.6

I've skimmed this thread, but not really followed what I've seen. Anyhow,
here is my experience:

When I'm copying lots of large, 1.8GB files to my new firewire 800 drive it
periodically just stops transferring (the light on the drive actually changes
back to the idle state) and then restarts again at full tilt.

In /var/log/syslog I have lots of these lines:
Sep 8 00:05:26 snozberry kernel: ieee1394: sbp2: aborting sbp2 command
Sep 8 00:05:26 snozberry kernel: Write (10) 00 00 f2 d4 f0 00 00 f8 00

In /var/log/messages I have some of these lines:
Sep 8 00:02:03 snozberry kernel: Write (10) 00 00 60 56 a8 00 00 18 00
Sep 8 00:02:03 snozberry kernel: Write (10) 00 00 60 56 c0 00 00 f8 00
Sep 8 00:02:03 snozberry kernel: Write (10) 00 00 60 57 b8 00 00 f8 00
Sep 8 00:02:03 snozberry kernel: Write (10) 00 00 60 58 b0 00 00 f8 00
Sep 8 00:02:03 snozberry kernel: Write (10) 00 00 60 59 a8 00 00 18 00
Sep 8 00:05:26 snozberry kernel: Write (10) 00 00 f2 d1 f0 00 00 f8 00
Sep 8 00:05:26 snozberry kernel: Write (10) 00 00 f2 d2 e8 00 00 18 00
Sep 8 00:05:26 snozberry kernel: Write (10) 00 00 f2 d3 00 00 00 f8 00
Sep 8 00:05:26 snozberry kernel: Write (10) 00 00 f2 d3 f8 00 00 f8 00
Sep 8 00:05:26 snozberry kernel: Write (10) 00 00 f2 d4 f0 00 00 f8 00
Sep 8 00:05:26 snozberry kernel: Write (10) 00 00 f2 d6 00 00 00 f8 00
Sep 8 00:05:26 snozberry kernel: Write (10) 00 00 f2 d6 f8 00 00 f8 00
Sep 8 00:05:26 snozberry kernel: Write (10) 00 00 f2 d7 f0 00 00 f8 00

/var/log/kern.log has this:
Sep 8 00:01:33 snozberry kernel: ieee1394: sbp2: sbp2util_node_write_no_wait
failed
Sep 8 00:01:33 snozberry last message repeated 4 times
Sep 8 00:02:03 snozberry kernel: ieee1394: sbp2: aborting sbp2 command
Sep 8 00:02:03 snozberry kernel: Write (10) 00 00 60 56 a8 00 00 18 00
Sep 8 00:02:03 snozberry kernel: ieee1394: sbp2: aborting sbp2 command
Sep 8 00:02:03 snozberry kernel: Write (10) 00 00 60 56 c0 00 00 f8 00
Sep 8 00:02:03 snozberry kernel: ieee1394: sbp2: aborting sbp2 command
Sep 8 00:02:03 snozberry kernel: Write (10) 00 00 60 57 b8 00 00 f8 00
Sep 8 00:02:03 snozberry kernel: ieee1394: sbp2: aborting sbp2 command
Sep 8 00:02:03 snozberry kernel: Write (10) 00 00 60 58 b0 00 00 f8 00
Sep 8 00:02:03 snozberry kernel: ieee1394: sbp2: aborting sbp2 command
Sep 8 00:02:03 snozberry kernel: Write (10) 00 00 60 59 a8 00 00 18 00
Sep 8 00:04:56 snozberry kernel: ieee1394: sbp2: sbp2util_node_write_no_wait
failed

During the copy my load tops out around 9 and top tells me cp is using about
10% of my Opteron 142 (x86info says Opteron[SH7-B3]).

Linux snozberry 2.6.6 #1 Wed Sep 1 13:00:41 EDT 2004 i686 GNU/Linux

Cheers.
Chris.

-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=5047&alloc_id=10808&op=click
_______________________________________________
mailing list Linux1394-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux1394-user
Received on Wed Sep 8 07:32:54 2004