Hi everyone !
I am really really hoping someone can help with the following,
I am new to linux but learning fast, but I have been on the following for weeks
without success.
I have a 4bay firewire enclosure. It has 2 oxford 411 bridge cards inside each
bridge has a master and slave ide hard drive attached to it.
In windows all is well - all 4 are recognised.
BUT - I have tried redhat 9 (2.4.), mandrake 10.1, knoppix even linspire
but I cannot get linux to see all 4 drives. Instead it only sees
1 drive from each bridge board. I cannot get it to see the second drive
on each board. I have tried rescaning the scsi bus with the script, and
when I do that it see the same drive 7 times and assigns each to a device
eg sda1,sdb1,sdc1 etc
Can I get this to work ? has anyone succeeded ? this a driver I need to download
I have tried so many forums but not seen anyone trying a 2 or 4 bay enclosure.
-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_idU88&alloc_id065&op%cck
_______________________________________________
mailing list Linux1394-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux1394-user
Received on Wed Oct 27 16:15:29 2004
This archive was generated by hypermail 2.1.8 : Mon 02 May 2005 - 09:16:50 CEST