On Wed, 2005-01-12 at 02:21 -0500, Gene Heskett wrote:
> extracting that its a Sony etc. However, there is no /dev/fw-host0
> file anyplace in the /dev tree so I'm a bit stuck at moving any
> closer to actually working.
You want to look for /dev/raw1394. If it does not exist, create it
manually as root:
% mknod -m 666 /dev/raw1394 c 171 0
> This goes on for about 20k, (debugging is on obviously) and finally
Yes, turn that option off in the IEEE 1394 section of the kernel config.
> Do we have an ieee1394 viewer that works like usbview? That might be
> enlightening here.
I am not familiar with usbview.
> That seems, from what I've found on the web, to indicate either kino,
> or dvgrab as the tool of choice to grab an image from this camera.
Correct
> Unforch, going back to the web page where these (kino, dvgrab) can be
> downloaded, I don't have perms to actually dl these, getting an error
> 403 from the server both last nite when I first tried to dl them and
> again tonight.
Yes, the site owner is aware of the problem. Unfortunate state of
affairs that it is still unresolved. You can download them from:
http://sf.net/projects/kino/
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
mailing list Linux1394-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux1394-user
Received on Thu Jan 13 01:32:46 2005
This archive was generated by hypermail 2.1.8 : Mon 02 May 2005 - 09:16:51 CEST