Aaron.McFarland@ctimi.com wrote:
> Ultimately, I would like to have the ability to capture the isochronous
> data on both the winXP box and Linux box at the same time. Is it possible
> to do this using a single iso channel, or is a iso channel strictly
> point-to-point? [...]
> I was hoping that the winXP box could start the iso transfer and the
> linux box could listen on the same channel.
Only some asynchronous transfers are point-to-point (I guess the
commands used to start and stop streams are point-to-point) but
isochronous streams can be received by all nodes on the bus. What you
plan to do is absolutely possible.
-- Stefan Richter -=====-=-=-= --=- -=-=- http://arcgraph.de/sr/ ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ mailing list Linux1394-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux1394-userReceived on Thu Feb 10 21:29:03 2005
This archive was generated by hypermail 2.1.8 : Mon 02 May 2005 - 09:16:52 CEST