miao huijie wrote:
> I am trying to install a Powerfile C200 jukebox to my
> Fedora Core 3 though a firewire port. The Kernel
> version is 2.6.9-1.667. The libraw version is
> libraw1394-1.1.0. I loaded all the modulus needed:
> ieee1394, ohci1394, raw1394 and sbp2. The device is
> recognized by "gscanbus". But it is not recognized by
> "rescan-scsi-bus.sh" or "cdrecord -scanbus" or "more
> /proc/scsi/scsi". Any suggestion? Thanks a lot!
Did no one tell you yet that ieee1394 in kernel 2.6.9 does not support
the PowerFile? You must use kernel 2.6.11-rc4 and ieee1394 from
linux1394.org subversion trunk. Or use a kernel 2.4.22+.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
mailing list Linux1394-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux1394-user
Received on Tue Feb 22 20:19:23 2005
This archive was generated by hypermail 2.1.8 : Mon 02 May 2005 - 09:16:53 CEST