System: Mandrake 10.1 for x86_64 (AMD64, kernel 2.6.8)
After loading all recommended modules (ieee1394, ohci1394,raw1394 for
the Adaptec fireconnect 8400, sbp2, sg, sr_mod for the Plextor DVD -
burner PX-716UF) the firewire-card is recognized correctly on the
pci-bus as fw-host0, but there are no nodes for the plugged-in
Plextor-drive. I tried to disconnect, connect, and load a CD for
mounting serveral times, but the drive is never recognized. I tried
although to restart the hotplug - service, preload the modules adding
the necessary lines in the file modprobe.preload and to invoke the
hotplug-subsystem ieee1394 and scsi by editing the file
/etc/sysconfig/hotplug ($HOTPLUG_*SUBSYSTEM_RC), but everything with no
effect. According to the compatibility-list the Adaptec fireconnect 8400
should work quite well and at least the Plextor PX-712UF with the
sbp2-module.
Can anyone help me?
Thank you very much for any advices and suggestions!
Thomas Hagn
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
mailing list Linux1394-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux1394-user
Received on Fri Feb 25 17:31:45 2005
This archive was generated by hypermail 2.1.8 : Mon 02 May 2005 - 09:16:53 CEST