Re: summery: Re: Supported "Sony DCR-HC40E" not recognized with supported "Digitus IEEE 1394 PCMCIA Card"

Jens Nachtigall wrote:
> I could reproduce the following with 2
> different PCMCIA-to-Firewire adapters and with different LiveCDs
> aswell:
>
> Grabing video works fine with dvgrab (after removing eth1394). However:
> kino as well as gscanbus do not detect the camera. gscanbus does not
> even show the PCMCIA-firewire-card, when I plug it in (though it is in
> lspci as posted previously). gscanbus only shows:
> http://www.informatik.hu-berlin.de/~nachtiga/bugs/gscanbus_without_pcmcia.png
> which seems to be the small builtin firewire connector of my laptop.

Gscanbus shows only the first found adapter by default. You need a
patched version of gscanbus with a command line parameter that lets you
select a different bus or "port".

I suppose you would point Kino to the right adapter by changing the
video1394 device file name. But there may be other possibilities; I
never tried Kino myself.

-- 
Stefan Richter
-=====-=-=-= -=-- =-==-
http://arcgraph.de/sr/
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
mailing list Linux1394-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux1394-user