Bilbao Josu wrote:
> Does anyone know if there is any application to
> monitorize the used bandwidth in a 1394 bus?
> I have seen at least one application that shows which channels are
> being used and the used bandwidth too.
I don't know of such an application. However you should know what you
really want to monitor:
- how much bandwidth and which channels are _allocated_ (simply read
the according registers of the IRM), or
- how much bandwidth and which channels are actually _used_. (I guess
you have to listen to all channels.)
Allocation is voluntary, therefore it is not only possible that less
resources are used than are allocated but also that _more_ is used than
allocated (a situation which would go against the spec but is
technically possible).
-- Stefan Richter -=====-=-=-= -=-- ===-- http://arcgraph.de/sr/ ------------------------------------------------------- SF.Net email is sponsored by: Tell us your software development plans! Take this survey and enter to win a one-year sub to SourceForge.net Plus IDC's 2005 look-ahead and a copy of this survey Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix _______________________________________________ mailing list Linux1394-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux1394-userReceived on Thu Apr 28 13:54:20 2005
This archive was generated by hypermail 2.1.8 : Mon 02 May 2005 - 09:16:54 CEST